SKF 6316C3 Bearing
-
Payment
-
Origin
China Mainland
-
Minimum Order
5
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
SKF 6316-2RS1Deep groove ball bearings
SKF 6316-2RS1 Bearing Product Description
This 6316 C3 SKF bearing is a Open Type Deep Groove Radial Ball Bearing with a larger than standard radial internal clearance The bearing's dimensions are 80x170x39.
Deep groove ball bearings are available in a variety of sizes and are the most popular of the rolling bearings. This type of bearing supports radial load and a small degree of axial load in both directions simultaneously. Deep groove ball bearings are popular due to their versatility, affordability, and capability to run at high speeds. Most bearings in the 6000 series up to 60mm bore can be made available in stainless steel (AISI 440C material) upon request. Contact a Timken sales engineer for details.
6316/C3 SKF Deep Grooved Ball Bearing 80x170x39 Open
Deep Groove Ball Bearings are the most common bearing type found in a wide variety of applications. Versatile and robust they are available in a wide range of sizes and options including seals, shields and special clearance for high speed applications. The main types are:
Open - Bearing without seals or shields, suitable for applications where lubricant will constantly flow through them i.e. gearboxes.
Metal Shields - Bearings fitted with steel shields and lubricated for life.
Rubber Seals - Bearings fitted with steel reinforced rubber contact seals which provide a better seal but add friction so are unsuitable for high speed applications, lubricated for life.
C3 - Radial internal clearence greater than normal
Technical Reference 6316/C3 Legislation and Compliance
RoHS Status: Not Applicable Statement of conformity
Product Details Deep Groove Metric Ball Bearings - Open
SKF deep groove ball bearings are the most common type of rolling bearings.
Available in a variety of metric sizes and found in a wide range of applications in many industries.
Features and Benefits Accepts radial and axial loads High speed operation Primarily intended for applications where the bearing inner ring rotates .
If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
Deep groove ball bearings are particularly versatile. They are suitable for high and very high speeds, accommodate radial and axial loads in both directions and require little maintenance. Because deep groove ball bearings are the most widely used bearing type, they are available from SKF in many designs, variants and sizes.
In addition to the bearings presented in this section, deep groove ball bearings for special applications are shown under Engineered products. These bearings include:
Sensor bearing units
High temperature bearings and bearing units
Bearings with Solid Oil
INSOCOAT bearings
Hybrid bearings
NoWear coated bearings
Polymer ball bearings
SKF 6316-2RS1 Bearing dimension chart
Dimensions
d 80 mm
D 170 mm
B 39 mm
d1 ˜ 108 mm
D2 ˜ 146.9 mm
r1,2 min. 2.1 mm
Abutment dimensions
da min. 92 mm
da max. 107.9 mm
Da max. 158 mm
ra max. 2 mm
Calculation data
Basic dynamic load rating C 130 kN
Basic static load rating C0 86.5 kN
Fatigue load limit Pu 3.25 kN
Limiting speed 2600 r/min
Calculation factor kr 0.03
Calculation factor f0 13.3
Mass
Mass bearing 3.7 kg
- SKF 6202ZZ Bearing 5 Pieces / (Min. Order)
- OEM L725349L725311 5 Pieces / (Min. Order)
- NTN 22324BD1C3 Bearing 5 Pieces / (Min. Order)
- NACHI 6205-2NSEC3 Bearing 5 Pieces / (Min. Order)
- SKF FYRP 3-7 16H W64 Bearing 5 Pieces / (Min. Order)